Rotary Crushers

The degree of fragmentation in rotary crushers is incredibly high. This type of Crusher is being used for primary crushing production. Rotary Crushers crush the material selectively. Crusher SMD-114 is designed for crushing rocks, which strength does not exceed the average value of chalk, coal, furnace slag and other rocks that do not obscure the grates.

Single-rotor Crusher is designed for fine crushing of exclusively brittle and soft materials, with average strength and humidity content, at which there is no glossing over grates. The degree of Crusher’s capacity is of 14th level. Unlike other types of crushers, this Crusher waste energy efficiently.

The main purpose of Rotary Crusher is crushing of brittle materials, strength of less than 120 MPa. Crushing wet rocks is also possible, on condition that it would not be glossing over grates. Position grates and Liner plates can be adjusted.

This type of Crusher is used for primary crushing of rocks. Strength of the crushing material should not exceed 60 MPa. Crushing plant can easily carry and operate at an ambient temperature of 40° to -40°C.

The main purpose of Single-roller Crusher is coarse grinding of hot compound, which has an average temperature of 600°C. Crushed material turns out in high-quality mostly cubic form. Operating of Crusher is based on the principle of destruction of the material under the influence of impact.

This type of Rotary Crusher is designed for primary crushing of limestone, dolomite, marl, marble, gypsum, ores of low abrasiveness. Strongly not recommended to break up the wet materials that can cause sticking. This Crusher is ideally suited for carrying out the primary crushing of the material.